|
Our range of Industrial Touch Screens and LED Displays have full network connectivity. The below table sets out the various options>>
| PLC Brand |
PLC Model |
Protocols Supported by EZPanel |
|
Allen Bradley
|
MicroLogix 1000/1200/1500
|
DH485 (Direct to PLC, 1761-NET-AIC),
DF1 (Full Duplex),
DF1 (Half Duplex),
DF1 over Ethernet/IP (Universal Ethernet required, must use 1761-NET-ENI),
DeviceNet (option card required, slave node only)
|
|
SLC 500, 5/01, 5/02
|
DH485 (Direct to PLC, 1747-AIC, and 1761-NET-AIC)
|
|
SLC 5/03, 5/04, 5/05
|
DF1 (Full Duplex),
DF1 (Half Duplex),
DH485 (Direct to PLC, 1761-AIC, and 1761-NET-AIC),
DF1 over Ethernet/IP (Universal Ethernet required, SLC 5/03 and 5/04 must use 1761-NET-ENI),
Data Highway Plus (SLC 5/04, uses DH+ option board),
Remote IO (Uses DH+ option card)
DeviceNet (Option card required, slave node only)
|
|
PLC 2, 3, and 5
|
DF1 (Full Duplex, PLC 5 only),
DF1 over Ethernet/IP (PLC 5 only, Universal Ethernet required)
Data Highway Plus (Option card required)
Remote IO (uses DH+ option card),
DeviceNet (Option card required, slave node only)
|
|
Controllogix, Compactlogix
|
DF1 (Full Duplex, uses SLC 500 DF1 driver, special mapping required),
DH485 (uses SLC 500/MicroLogix driver, special mapping required, direct to PLC or 1761-NET-AIC),
Ethernet/IP (using Universal Ethernet required)
Ethernet/IP-IO (uses Ethernet/IP-IO option card),
Data Highway Plus (uses DH+ option card, special mapping required),
Remote IO (uses DH+ option card),
DeviceNet (option card required, slave node only)
|
|
Aromat
|
Aromat
|
Mewtocol COM
|
|
Control Techniques
|
Unidrive 2-Wire
|
ANSI
Note: For Unidrive SP use Modbus RTU driver
|
|
Unidrive 4-Wire
|
|
Control Technology Corporation (CTC)
|
CTC2600
|
CTC Binary
|
|
CTC2700
|
|
CTC5100
|
|
Entivity (WinPLC)
|
H2-WinPLC Entivity (Think & Do)
V5.2 or later
|
Entivity (Think & Do) Modbus RTU (Serial Port) |
|
EZAutomation
|
EZPLC
|
EZ-Protocol (RS-232 only)
|
|
General Electric
|
90/30
|
SNP-X,
SRTP Ethernet (Universal ethernet required),
Note: When communicating to the 90/70 PLC you must use a CMM711 Communications Coprocessor Module
|
|
90/70
|
|
Versamax
|
|
Idec
|
Idec
|
Computer Link
|
|
Mitsubishi
|
FX Series (all)
|
FX Protocol
|
|
CCLink
|
CC Link (Option card required)
|
|
Computer Link
|
Computer Link Dedicated Protocol Format 1
|
|
Modicon
|
984 CPU
|
Modbus RTU (RS-232/RS-485, Master Node Only),
Modbus Plus (Option card required)
Modbus TCP (Universal Ethernet required)
|
|
Quantum 113 CPU
|
|
AEG Modicon Micro Series 110
|
|
CPU: 311-xx, 411-xx, 512-xx, 612-xx
|
|
Compact
|
|
Momentum
|
|
Omron
|
C200
|
Host Link
|
|
C500
|
|
CQM1
|
|
CPM1, CPM2
|
|
DirectLogic
|
DL05
|
K-Sequence, DirectNet, Modbus (Koyo Addressing),
|
|
DL06
|
K-Sequence, DirectNet, Modbus (Koyo Addressing),
Modbus RTU
|
|
DL105
|
K-Sequence
|
|
DL205
|
D2-230
|
K-Sequence
|
|
D2-240
|
K-Sequence, DirectNet
|
|
D2-250/D2-250-1
|
K-Sequence, DirectNet, Modbus (Koyo Addressing)
|
|
D2-260
|
K-Sequence, DirectNet, Modbus (Koyo Addressing)
|
|
D2-240/250 w/DCM
|
DirectNet
|
|
DL305
|
D3-330/330P
|
DirectNet
|
|
D3-340
|
DirectNet
|
|
D3-350
|
K-Sequence, DirectNet, Modbus (Koyo Addressing)
|
|
D3-350 w/DCM
|
DirectNet
|
|
DL405
|
D4-430
|
K-Sequence, DirectNet
|
|
D4-440
|
K-Sequence, DirectNet
|
|
D4-450
|
K-Sequence, DirectNet, Modbus (Koyo Addressing)
|
|
All w/DCM
|
DirectNet
|
|
Siemens
|
S7 300/400 Series
|
3964R Protocol (Must use Siemens MPI-HMI Adapter)
Profibus (option card required, slave node only)
|
|
Square D Symax
|
300 Series CPU
|
Symax
|
|
400 Series CPU
|
|
Texas Instruments
|
TI5x5 Series
|
TBP (Transparent Byte Protocol)
NITP (Non-Intelligent Terminal Protocol)
|
|
TI505
|
|
TI545-1102
|
|
TI545-1104
|
|
Uni-Telway
|
Telemecanique TSX 37 Micro
|
UNI-TE (Version 1.1)
|
|
